TM 11-6625-2781-14&P-2
CHANGE 11
Change ASA1CR1 to HP Part No. 1902-0785, Check Digit 3, DIODE-ZNR 1N936 9V 5% DO-7 PD=.5W.
Change A5A1R14 to HP Part No. 0812-0029, Check Digit 6, RESISTOR 7.1K 5% 3W PW TC-0+-20.
Change A5A1R32* and A5A1R38* to HP Part No. 2100-3355, Check Digit 0, RESISTOR-TRMR 100K 10% C
S11
ADJ I-TRN.
Add R6, HP Part No. 0698-7252, Check Digit 7, RESISTOR 4.64K 1% .05W F TC-0+-100.
Change A5A1CR1 to 9V.
Change A5A1R14 to 7.1K.
Add R6 to RANGE MHz switch circuit as shown in partial schematic below:
P/O Figure 8-42. First LO Tuning Voltage, Marker Generator, and Frequency Range Control Circuits (CHANGE 11)
CHANGE 12
Add A5A1R68, HP Part No. 0698-7336, Check Digit 8, RESISTOR 416.25% .125W F TC-0O+-100.
Add A5A1R68, 416 ohms, in series with A5A1R13 TUNING RANGE ADJ.
B-26
