TM 11-6625-2781-14&P-2
ERRATA (Cont'd)
Change second W4 entry to W4MP1.
Change third W4 entry to W4MP2.
Change second W5 entry to W5MP1.
Change third W5 entry to W5MP2
Change second W6 entry to W6MP1.
Change third W6 entry to W6MP2.
Change fourth W6 entry to W6MP3.
Change second W7 entry to W7MP1.
Change third W7 entry to W7MP2.
Change second W8 entry to W8MP1.
Change second W9 entry to W9MP1.
Change second W10 entry to W10MP1.
Change third W10 entry to W10MP2.
Change second W11 entry to W11MP1.
Change third W11 entry to W11MP2
Change second W12 entry to W12MP1
Change second W13 entry to W13MP1.
Change second W14 entry to W14MP1.
Change second W15 entry to W15MP1.
Change second W16 entry to W16MP1.
Delete 24. 0855340103, 1, WINDOW: SLIDING-BLACK, 28480.08553-40103.
Delete 25,08553-40102, 1, WINDOW: STATIONARY-BLACK, 28480.08553-40102.
Delete 39.08553-20114, 1, EXTRUSION-LIGHT GRAY, 28480,08553-20114.
Delete 43, 08553-00106, 1, PANEL: FRONT-LIGHT GRAY, 28480.08553-00106.
Delete 54,08553-20113, 1, PLATE: CONNECTOR-BLACK, 28480.08553-20113.
Add the following:
WARNING
Instrument power should be OFF during insertion or removal of extender boards. If power is ON,
dangerous voltages may be contacted
Replace Figure 8-22 with Figure 8-22 of this Manual Changes Supplement.
Change 957 wire leading from junction of R15 and R: 6 to 4 wire.
Change interconnection information to read: TO SS-2 (3 of 3) and SS-I 1.
Change CR1 to CR2 and CR2 to CR1.
Interchange resistors R16 and R I 5. '
B-12
