TM 11-6625-2781-14&P-2
ERRATA (Cont'd)
In upper left-hand comer of wiring diagram, change CR5 to CR3.
In lower right-hand corner of wiring diagram, wire to IF Section color-coded "927" should be color-coded "917".
Replace Figure 8-24 with Figure 8-24 of this Manual Change Supplement.
Change A9A2C to A9A2C1 * 9.1pF.
Replace Figure 8-32 with Figure 8-32 of this Manual Change Supplement.
Replace Figure 8-33 with Figure 8-33 supplied in this supplement.
Change C39, 3.3, to C39*, 16 pF.
Reverse positions of CR9 and CR10: reverse positions of CR11 and CR12.
In Search Oscillator Amplifier circuit, change reference designation Q2 to Q3; change Q3 to Q2.
Add after APC BOARD ASSY A6A1: (08553-6060).
Change value of A8A1R35 to 909K.
Page 8-38, Paragraph 7:
Change (R3) in first line to (R2).
Reverse polarity of ASA1C4.
Change value of ASA1R6 to 909K.
Change the value of A4R6 to 9090.
Change the value of A4R7 to 2K.
Change the L3 reference designator nearest the A10A2 Second Mixer to LS.
On S2-5R wafer layout diagram, change 93 wire at 5 1/2 position to 4 wire.
Change S2-R5 switch contact schematic as shown in partial schematic in this Manual Change Supplement.
CHANGE 1
Change Al second entry, HP Part Number 08553-00109, to HP Part Number 08553-00134.
Change A2 second entry, HP Part Number 08553-00111, to HP Part Number 08553-00135.
Change A3 second entry, HP Part Number 08553-0014, to HP Part Number 08553-00133.
B-13
