TM 11-6625-2781-14&P-2
Section I
Table 1-4. Test Accessories (cont'd)
Item
Minimum Specifications or Required Features
Suggested Model
50-Ohm Tee
Type N female connectors on two ports, with the
HP 11536A 50-ohm
third port able to accept HP 8405A probe tips.
10-dB Fixed
Attenuation: 10 dB 0O.2 dB
HP 8491A, Option 10
Attenuator
50-Ohm Termination
Frequency Range: Dc to 500 MHz
HP 11593A
VSWR: 1.1
Power Rating: 0.5 Watts
Connector: BNC Male
Three-Port
Mixer Frequency Range: 40-150 MHz
HP 10514A Mixer
Impedance: 50 ohms
Connectors: Female BNC on all ports
Input Power: 5 mW nominal
BNC Tee
Two BNC Female Connectors, one Male BNC
UG-274B/U
Connector
HP 1250-0781
Adapter
BNC Male to Type N Female
UG-349A/U
HP 1250-0077
Adapter
BNC Male to Binding Post
HP 10110A
Adapter (2)
BNC Female to Type N Male
UG-201A/U
HP 1250-0780
Test Fixture
Consists of:
Figure 1-7. Test Fixture
Blocking Capacitor 500 F 3V
HP 0180-1734
BNC Female Connectors (2)
HP 1250-0083
Voltage Probe
Dual Banana Plug to Probe Tip and Clip
HP 10025A Straight-
(Ground) Lead
Through Voltage Probe
Cable Assembly (3)
Male BNC Connectors, 48 inches long
HP 10503A
Cable Assembly
Dual Banana Plug to Clip Leads, 45 in. long
HP 11002A
Cable Assembly
Dual Banana Plug to Dual Banana Plug, 44 in. long
HP 11000A
1-10
