TM 11-6625-2781-14&P-2
Section I
Table 1-4. Test Accessories (cont'd)
Item
Minimum Specifications or Required Features
Suggested Model
Cable Assembly
BNC Male to one end only; 44 in. long. (Attach
HP 10501A
Test Clips to Shield and Center Conductor.)
Tuning Tool, Blade
Nonmetallic Shaft, 6 inches long
General Cement 5003
HP 8730-0013
Tuning Tool, Slot
Nonmetallic, 5-inch Shaft
Gowanda PC-9668-1
HP 8710-1010
Wrench
Open-end, 15/64 inch
HP 8710-0946
Screwdrivers
Phillips #1; Phillips #2
Pozidriv #1 (Small); Stanley #5331
HP 8710-0899
Pozidriv #2 (Medium); Stanley #5332
HP 8710-0900
Tuning Tool, Slot
Nonmetallic, 2.5 inch shaft
HP 8710-0095
Adapter
Subminiature jack-to-jack adapter
HP 1250-0837
Adapter
BNC Female to sub-miniature Male
HP 1250-0832
Termination
Sub-miniature 50-ohm Termination
HP 1250-0839
Adapter
8405A Probe to Male BNC
HP 10218A
Load Assembly
50-ohm Load Assembly
HP 08553-60122
Cable Assembly
Interconnection cable between Tracking
HP 08443-60049
Generator and Spectrum Analyzer
1-11/1-12
