Section VII
TM 11-6625-2781-14&P-2
Table 7-1. H01/H02 Changes to Replaceable Parts, Table 6-3
Change to read as follows:
A9
08553-62007
200 MHz IF ASSY
A9A2
08553-62006
FIRST CONVERTER ASSY
A12
08553-62001
CAPACITOR ASSY (H01 ONLY)
W1
08553-62002
CABLE ASSY:75 OHM (H01)
W1
08663-62009
CABLE ASSY:75 OHM (H02)
54
08553-02006
PLATE:CONNECTOR-BLACK
54
08553-02008
PLATE:CONNECTOR-OLIVE BLACK
Add the following:
A9A2L1
9100-2251
COIL:FXD 0.22 UH 10%
A9A2R1
0698-3441
R:FXD 215 OHM 1% 1/8W
A9A2R2
0698-3432
R:FXD 26.1 OHM 1% 1/8W
A9A2R3
0698-3441
R:FXD 215 OHM 1% 1/8W
A15
08553-62003
MATCHING PAD ASSY
W18
08553-62004
CABLE ASSY:A3 TO A15
W18
1400-0025
CLAMP:CABLE
W18
08553-02002
BRACKET:CONNECTOR
dating changes. Use Table 7-2 to find the changes
7-12. MANUAL BACK-DATING
needed to adapt this manual to your instrument. Then
follow the instructions listed under the changes,
performing the changes in sequence listed in Table 7-2.
8553B and the manual back-dating changes needed to
document any instrument. Table 7-3 lists the back-
Table 7-2. Back-Dating Serial Numbers
Serial Number or Prefix
Make Manual Changes (in sequence)
945-, 972-
E, D, C, B, A
982-00451 to 982-00525
E, D, C, B, A
982-00526 to 982-00950
E, D, C, B
982-00951 to 0982A00975
E, D, C
0982A00976 to 0982A01500
E, D
0982A01501 to 0982A01600
E
1144A
E
Table 7-3. Back-Dating Changes (1 of 2)
CHANGE A
On Table 6-2, Replaceable Parts:
Change as follows: A6A1R6 to 0757-0401
R:FXD 100 OHM
A7A1R19 to 0698-3429
R:FXD 19.6 OHM
A8A1R11 to 0698-3157
R:FXD 19.6K OHM
A9A1L11 to 9100-1611
COIL:FXD 0.22 UH
A1OA1R5 to 0698-3431
R:FXD 23.7 OHM
CHANGE B
On Table 6-3, Replaceable Parts:
Change A2R19 to 0698-7534 R:FXD 22 OHM.
CHANGE C
Add the following notation to Table 6-3, Replaceable Parts:
When ordering replacement spring (08553-00113) for the sliding window on the front panel, order replacement
stationary window (08553-40102). (The new spring is not compatible with the window on serial numbers
0982A00975 and below.)
7-6
